S-99136A110 Length 5" Drywall Screws

Key Features & Benefits at a Glance

• Superior corrosion resistance with zinc yellow-chromate plating, ideal for long-term durability in various environments
• Enhanced holding power through thread forming design that securely grips drywall and wood without pre-drilling
• Efficient installation with Phillips No. 2 drive and pointed tip for quick, precise penetration and reduced operator fatigue
• Optimized thread engagement featuring 2-1/2" thread length and 9 threads per inch for strong, reliable fastening in drywall applications
• Clean, flush finish thanks to the standard flat head profile that sits neatly below surface level
• Versatile material compatibility with partial threading and right-hand direction suitable for both drywall and wood substrates
• Consistent performance ensured by precise No. 10 screw size and 0.19" thread diameter for uniform load distribution

Professional Applications & Engineering Value

These zinc yellow-chromate-plated steel drywall screws address critical installation challenges in construction and renovation projects. The thread forming tapping method creates tight, secure threads in drywall and wood without causing material splitting, eliminating the need for anchors in many applications. The partial threading design allows the unthreaded shank to act as a shear plane, preventing over-tightening while maintaining structural integrity. With a 5-inch length and pointed tip, they provide deep penetration for hanging heavy drywall panels or securing wood framing, while the Phillips flat head ensures smooth, countersunk finishes. The corrosion-resistant plating extends service life in humid or variable temperature conditions, making these screws ideal for residential and commercial drywall systems, partition walls, and wood-based assemblies where reliability and ease of installation are paramount.

Specification Summary & Compliance

This No. 10 x 5" drywall screw features inch system measurements with a thread diameter of 0.19" and approximately 9 threads per inch, conforming to standard drywall screw dimensional requirements. The flat head profile and Phillips drive comply with common industry installation tools, while the thread forming design follows established fastening principles for non-ferrous materials. Manufactured from plated steel, these screws meet general industry standards for construction applications and are suitable for use in compliance with common building codes for drywall and wood fastening. The zinc yellow-chromate finish provides basic corrosion protection consistent with standard environmental exposure requirements for indoor construction projects.