S-92114A257 Length 3" Wood Screws

Key Features & Benefits at a Glance

• Superior corrosion resistance with solid brass construction, ideal for humid or outdoor wood applications
• Enhanced holding power through thread forming design that compresses wood fibers without pre-drilling in softwoods
• Clean, flush installation with 82° countersink angle and standard flat head profile for professional finishes
• Reduced cam-out and stripped heads with No. 2 Phillips drive for secure driving and consistent torque transfer
• Optimized wood grip with 0.19" thread diameter and 13 TPI providing excellent pull-out resistance
• Versatile partial threading allowing unthreaded shank to act as a pivot in assembly applications
• Environmental compliance assurance meeting RoHS 3 and REACH standards for safe, regulated use

Professional Applications & Engineering Value

These No. 10 brass wood screws deliver exceptional performance in both hardwood and softwood applications, from furniture manufacturing to architectural woodworking. The thread forming design creates permanent, high-strength threads in wood by displacing material rather than removing it, significantly increasing pull-out resistance compared to traditional cutting threads. The brass material provides natural corrosion resistance without plating or coating, making these flat head screws ideal for marine environments, historic restoration, and applications where rust-free fastening is critical. The combination of partial threading and pointed tip ensures easy starting and controlled penetration, while the 82° countersink angle allows the screw head to sit flush with wood surfaces for professional, finished appearances in cabinetry, millwork, and fine woodworking projects.

Specification Summary & Compliance

These 3" wood screws feature a No. 10 screw size with 0.19" thread diameter and approximately 13 threads per inch. The partially threaded design provides 2" minimum thread length with right-hand threading direction. Manufactured to precise dimensional standards with Class 2A thread tolerances, these screws are compliant with RoHS 3 (2015/863/EU) and REACH (EC 1907/2006) environmental regulations. Recommended drill bit sizes are 7/64" (0.109") for hardwood and 3/32" (0.094") for softwood applications to ensure proper thread engagement and maximum holding strength.